• facebook
  • youtube
  • Canvas sm
  • mymacc
  • applynow

Associate of Applied Science
Engineering Systems - Maintenance

The Maintenance Program is being revised into a new Advanced Manufacturing Technology Program.

MACC's Associate of Applied Science degree in Engineering Systems – Maintenance program prepares the student for entry into the general industrial maintenance field. Courses provide skills in basic electrical circuits, electric motor controls, machining, fluid power, welding, maintenance management, predictive maintenance, quality control, and production planning. Most courses involve hands-on experience with up-to-date, high-technology equipment found in current manufacturing operations.

Academic Map

This academic map is a suggested semester-by-semester schedule of courses based upon the AAS degree requirements as outlined in the academic catalog. In order for you to graduate in two years, specific milestones, courses and other requirements (e.g. prerequisites) must be met in a timely manner. Additionally, keep in mind this map does not substitute for academic advisement. If you have questions, see your advisor and refer to the MACC website for current information. Finally, enrolling for courses during the summer session is an option and can reduce your regular course load and allow you to stay on track to graduate in two years.


Course Semester Hours Milestone*
  First Semester (Fall)
 AMD110  Industrial Print Reading: CPT2 3  
 EET100  DC/AC Electronics 3  
 IND103  Industrial Safety & Health: CPT1 3  
   ***Maintenance Elective 3  
 MTH130 or
 ^Technical Mathematics** or
 ^Precalculus Algebra**
3  MTH130 or
 SKL101  College Orientation 1  SKL101
  Second Semester (Spring)
 EET101  ^Industrial Electricity 3  
 EET110  ^Digital Electronics and Control 3  
 IND100  Introduction to Manufacturing: CPT3 3  
 IND101  Fundamentals of Industrial Maintenance: CPT4 3  
 IND105  Fluid Power Principles 3  
 SPK101  Public Speaking 3  
  Third Semester (Fall)
 BUS150 or
 IND120 or
 ^Business Communication** or
 ^Technical Report Writing** or
 ^Composition I**
3  BUS150 or
 IND120 or
 CIT101  Computer Essentials    
 EET111  ^Electric Motor Controls 3  
   Humanities 3  
 IND200  Mechanical Systems 3  
   ***Maintenance Elective 3  
  Fourth Semester (Spring)
 HST105 or
 HST106 or
 American History to 1865 or
 American History from 1865 or
 Functions & Policies of American Government
 PHY125  ^Foundations of Physics 5  
   ***Maintenance Elective 3  
   ***Maintenance Elective 3  
 SKL250 or
 Employment Seminar or
 ^Industrial Technology Internship
  Total Hours for Degree 67-68**  


**All fundamental math and English courses (e.g. MTH015) must be completed during the first semester. Required math and English courses must be completed immediately following the completion of fundamentals coursework or as listed on the degree map. Enrollment in fundamentals courses may delay completion of the degree. Fundamentals Courses are not included in the total credit hours required for the degree. 

*It is strongly recommended that students successfully complete the Milestone courses as planned on the academic map to ensure completion of the degree in two years. In addition, if students do not successfully complete the Milestone course(s), they are strongly encouraged to re-enroll in the course(s) the following semester.

***Maintenance Electives:
AMD112 Computer-Aided Design I
BUS250 ^Business Opportunity Analysis
IND299 ^Rapid Prototyping
MSP101 Machine Tool I
MSP102 ^Machine Tool II
MSP222 ^CNC Operations
WLD101 Welding I
WLD102 ^Welding II

^Please refer to the course descriptions for pre/co-requisite and placement information. You can only register for these courses if you have met the prerequisite, placed into the course and/or enroll in the co-requisite course(s).